Putting in a brand new fuel tank into your Acura Integra provides its share of challenges, however with the proper tools and data, it may be accomplished. Perceive every thing you want to do earlier than installing a brand new fuel tank in any Integra model.
Acura Integra Fuel Tank Installation Instructions
1. Take off the fuel tank filler cap and use a siphoning package to empty the fuel right into a fuel container. Take away the fuel pump cowl. Unplug the fuel gauge sending unit and the fuel hoses out of your gas tank. Untie the highest and backside tank straps. Decrease the tank onto the bottom with a ground jack.
2. Use the ground jack to lift the alternative gasoline tank into place beneath your Acura Integra trunk. Tie the tank straps onto the highest and backside of the fuel tank. Examine the straps to ensure your fuel tank is securely held in place earlier than going any additional.
3. Join the fuel hoses to the fitting aspect of the fuel tank. Watch out how you place the hoses onto the fuel tank. In case you bend the hoses an excessive amount of, they’re going to be ineffectual and you may want to switch them.
4. Plug within the wiring from the fuel gauge sending unit, and put the fuel pump cowl again on. Relying on which mannequin of Acura you might have, the pump may very well be on the left or proper facet of the automotive.
5. Pour the fuel again into the fuel tank drain. Change the tank’s drain bolt over the drain to cowl the fuel tank opening. Examine for any fuel spillage across the tank and clear up your work space.
6. Test your Acura Integra for any unfastened wiring or gas leaks. When you’re performed, begin the automobile and take it for a drive. Maintain an in depth eye in your gasoline tank for future leaks. If a leak or every other harm happens, name a mechanic instantly.